Posted by chad from michigan on July 20, 2011 at 09:51:49 from (151.163.3.10):
well I called my local IH dealer and he really tried to help but everything we looked up was a different number or in a bundle package and then wasn't avalable anymore. So he thinks he got me the shaft seal part number 353183R91 $10.00 he thinks its the right part. I measured my oil seal I took out ID .625", OD 1.125" x .37" THK the local bearing house will have a seal number 6925 to me by tomorrow just incase its .625" x 1.124" x .375" between the 2 I should have the seal. I was able to get the o-rings to seal the manifold to the metal hoses. I mean if the seal seals good what else should I replace if anything? the inside oval o-ring is good to seal the halfs so I should be good right? thanks for the help. I am diffentaly jealous of you guys that have great expereinces finding your parts on-line and at the local dealer. everytime I go there it is about a 90% chance I don't get my part in the first trip. Chad
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.