Posted by Brad Gyde on July 12, 2011 at 06:32:43 from (173.109.50.78):
About 6-8 months ago, I bought a Farmall Cub that needed some attention.. I've been slowly getting it back into shape.. Got it to where it ran good, then started making oil.. Figured due to rise in engine oil but loss of hyd. oil that the pump was the culprit (and I was right). Friday I visited my local dealer and picked up the "seal kit" for my pump, and spent a couple hours and got it fixed (or seems to be).
MY QUESTION IS: Going by the part/casting number on the pump I got the correct seal kit, but the O-Ring for the "shaft seal" was not the proper size.. it was a good amount too large. I called my dealer to verify we had the correct kit (after I had taken the pump in with me when getting the kit.. as we're all human and can error sometimes), and he looked the o-ring in question up by part number and it too was too large.. We did find a o-ring that worked, so no harm I guess, just wondering if anyone else had the same issue? If so, did you just get a o-ring by size (as we did) or is there a part number that is in fact correct (or maybe my kit was just "shy" a o-ring??)?
Just wondering so I can make a note of it in case I should ever have to do this again.. Makes it really handy when a fella writes all this stuff down just in case there is a next time.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.