Well Eric, from what you have described, they got shafted. Best priced on a fully restored, working, all correct Farmall A without hydraulics MIGHT be what they paid for it, but that is really pushing it. Closer to around $1600 +/-. To repair or replace what you have listed, and to do it correctly, you will have at least $750 + in it, and that is if you do all the work yourself.
Everyone at one time or another has bought something for WAY more than it is worth. Ususally, you don't get your money back. BTW, if they truly feel that the tractor was mis-reprented, and if the seller is laughing his way to the bank, they might be able to file a claim in small claims court. MAYBE. Local district magistrates don't usually take kindly to sheisters taking advantage of unknowing buyers.
For $2000, they could have gotten a decent Super C or an H or an M with work life left in it. Then they would have had hydraulics and a number of other good features. At the price they paid, if it had a plow, sickle mower, disk, etc. then the price would have been ok.
There are implements out there for the plain Jane A, you just have to look for them. As far as adding hydraulics, it depends upon whether or not the block has the opening for the pump.
I hate to say this, but the only way they may come close to getting their money back is to part out the whole tractor. If there are good parts on it, especially rubber, they may get close to covering their "loss".
of course, this is all IMHO. Others will weigh in, I am sure.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
