Farmall & IHC Tractors Discussion Board |
Re: Re: primer
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by LarryG on July 27, 2000 at 18:00:04 from (32.100.243.223):
In Reply to: Re: primer posted by Guy Fay on July 24, 2000 at 05:37:56:
..speaking of primers, I dropped in at a local PPG auto paint store to decide on a primer/paint system. I bought a sort of expensive 2 - part primer to go with their 2- part top coat. I want to do a nice job on the ole' gal. Haven't started yet but what a pain in the neck this is going to be - my original plan was to strip, scrape, wire brush and blast the various parts, prime as I go then top coat every thing all at once. I guess my thinking on the topcoat was ok, but I think I'm going to go through a lot of $84/gal primer doing small batches. The stuff has a shelf life of 2 hours at best once you mix it up! These plans are all contingent on my being able to stop playing with my toy long enough to do it.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|