Posted by CNKS on April 14, 2011 at 18:27:43 from (216.144.104.128):
The block was hot tanked, and has all new or reconditioned parts. Only the cam was left untouched. Head and crank done at a machine shop. 3.25" sleeves, 132 cu in. Radiator seemed ok, so I did nothing to it. I'm going to flush it and maybe take it to radiator shop to have it cleaned. It did not overheat before the overhaul. Although I had no gauge, it never lost antifreeze out the overflow. The only thing I did different from was to add a temperature gauge to the UPPER block outlet. It runs on the edge of the red, and once I lost antifreeze out the overflow. I used the outlet off a C123, and cut off the top to fit the shorter C113 radiator. Another difference in the outlet is it is a larger diameter than the C113 outlet. I have two hoses overlapping to make up the difference between the block outlet and radiator inlet. My question is: Does the larger outlet detrimentally influence the water movement in the thermosiphon system? I really have not put the tractor under load yet, just run it around my property with no load. Currently installing the reconditioned Woods mower that was on the tractor when I bought it. The new head gasket is correct for the engine, it is not the smaller holed one for the C123. Did I miss something other than the radiator, which I believe is in pretty good shape.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
