Re: 1955 international 300 utitly restoration

Posted by Janicholson on April 10, 2011 at 10:03:43 from (199.17.6.81):

In Reply to: 1955 international 300 utitly restoration posted by terry strozyk on April 10, 2011 at 07:12:08:

There are no kits for the pumps. The oil pump can have the gears replaced if you can find NOS (rareish i think) The end plate on the pump can warp and needs to be flat sanded on a flat surface with 250 grit Silicon carbide paper. The gear end clearance should be less than .001, and more than .0005". Gaskets are available from IH, and very thin to allow adjustment of above dimension. The hydro pumps might need new seals, but there are no rebuildable parts. They were disposable. If the gear to housing is more than .002" it won't pump well.
Have a new plate made from the old pattern.
Draw it up in Autocad (or other) and export the file as DXF. Almost all Plasma torch CNC systems will take that file format. Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]