1955 international 300 utitly restoration

terry strozyk · Apr 10, 2011

hi i am curently in the prosess of restoring a 1955 international 300 utitly tractor and have been unable to locate some parts such as a rebuild kit for the oil pump oh i forgot to mention it is the gas 169 c.i. engine or a rebuilt oil pump also look for a rebuild kit for the hydrulic pump also looking for new top inspection plate cover for torc amplifer old one ate up from battery acid and bottom lever that conects torc amp. handle to lever

Janicholson · Apr 10, 2011

There are no kits for the pumps. The oil pump can have the gears replaced if you can find NOS (rareish i think) The end plate on the pump can warp and needs to be flat sanded on a flat surface with 250 grit Silicon carbide paper. The gear end clearance should be less than .001, and more than .0005". Gaskets are available from IH, and very thin to allow adjustment of above dimension. The hydro pumps might need new seals, but there are no rebuildable parts. They were disposable. If the gear to housing is more than .002" it won't pump well.
Have a new plate made from the old pattern.
Draw it up in Autocad (or other) and export the file as DXF. Almost all Plasma torch CNC systems will take that file format. Jim

1955 international 300 utitly restoration

terry strozyk

New User

Janicholson

Well-known Member