Posted by Smith1000 on February 06, 2011 at 14:58:55 from (99.196.160.56):
Quite some time ago, I purchased the new type of starter Gear for a Super C. It seems I have lost the instructions as I just have the new part in the box. I took the old starter out today and removed the old style Bendix. The new Bendix part, which is all one piece, does not want to slide on to the shaft because there is a set screw that does not retract. The starter shaft is completely round and the set screw cannot be retracted because it doe not clear an outer sleeve on the starter.It covers about 1/2 of the screw. It doesn not appear that the sleeve is removable. There is probably an obvious way to do this, but I am not seeing it. I don"t want to damage anything. How do I get the new gear to slide on? Is the set screw supposed to align with where the old Bendix threads into the shaft? Any help is appreciated. I hope I don"t have the wrong part.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
