Posted by jimtrs on January 25, 2011 at 04:11:25 from (24.128.20.239):
I am helping someone with this International Industrial 3514 tractor, as it will only move in the lowest range & gear. Otherwise it seems to have a bad / slipping clutch. Now I know this tractor came with three different options for transmissions: Hydrostatic, Torque Converter and Forward Reverser. I have read a lot about these tractors not moving with the hydrostatic option. It appears this tractor has the Forward Reverser option as there is only one pedal on the left side and there is a forward / reverse lever on the left side. The clutch appears to be a regular mechanical clutch. Can't really tell at this point if it's a two stage or single. Does anyone know if there is more involved than a regular mechanical clutch with the Forward / Reverser option? There is no PTO in this tractor, though the owner does have the unit and would like it installed. The serial number tag is pretty well wiped out but I can see a prefix of “W” at the serial number location. This leads to several questions: Does anyone know if the clutch problem could be related to hydraulics, such as a slave cylinder, etc? Also any ideas about the best way to split this tractor. There was a full cab which has been removed. It seems the best split may be unbolting the frame from the rear axle and rolling the back of the tractor out. Obviously this will be a bunch of work to remove what’s needed to let this roll out. Any other ideas about splitting? Thanks in Advance, Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.