Posted by Owen Aaland on November 30, 2010 at 19:30:32 from (65.165.246.145):
In Reply to: 400, 450 PTO posted by caterpillar guy on November 30, 2010 at 19:01:32:
Quoting Removed, click Modern View to see
It is certainly possible. Whether it is practical is another question. R code lists TA with transmission driven PTO so there are some parts that you can reuse compared to a tractor without TA and with transmission driven PTO. In your case the PTO is actually driven in the same manner as the IPTO instead of being driven by the transmission counter shaft so I don't think any changes are necessary in the transmission.
Along with the PTO units themselves,the differences start with the clutch pressure plate. The IPTO unit needs a PPS cover that had the hub for the IPTO drive shaft. The single shaft coming out of the clutch needs to be replaced and the IPTO gear added. On the bottom shaft in the clutch housing the lower gear needs to be replaced. Since the IPTO unit is a planetary drive unit the input shaft runs at a different speed than the transmission driven PTO. The bottom shafts also have to be changed an i believe a bearing added at the back of the clutch housing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
