Posted by FC Andy on August 23, 2010 at 17:36:37 from (74.126.84.52):
In Reply to: 806 stuck in REVERSE posted by HiteJR on August 22, 2010 at 16:41:15:
Well, I just got done rebuilding the linkage on my 806D and It wasn"t that big of a deal. I may have spent $200 on the parts for the range transmission, which fixed my problem. Mine wouldn"t go into reverse, Just kept getting worse over time. I bought my parts aftermarket, and I bought bushings at the hardware store and then bored the top cover to press in the bushings for the pivot arms to make everything work. I"d ask the fella if this just happened, or if it has been shifting bad for a long time. That being said, If you"re looking to buy a tractor that 806 won"t shift real great even after fixing it, (just decent), if you"re going to do lots of chore work (Constant shifting) I"d look into an 856 or newer. 56 and 66 tractors just shift better. (At least the ones I"ve been around, not all may be that way). If you can get the 806 for the right money, go for it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.