Posted by Haas on April 05, 2010 at 07:38:08 from (75.216.244.88):
I am restoring a U-2 power unit which has a C-113 engine, similar to the Farmall A. I need parts for the carburetor and fuel lines. It has a Zenith 9750 carb (I think the IH number is 54214DB) This is different than the carbs on the A which seem to be 9749 or 9752, etc. I need a float and found that several places, but no luck on a kit, etc. None of the kits list the 9750 carb for some reason. Wonder where I can get a kit that will work, or will the kit for the 9749 or 9752 work?? Also there is an brass angle fuel shut off valve under the gas tank. It leaks. It will not shut off completely and also leaks out of the stem packing. I need something to go there to replace it. I want to leave the original metal tubing and not go to rubber hose which I could do. I need a brass angle valve with 3/8 pipe threads to screw into the tank and with connection for the 1/4 inch metal tubing. Wonder where I can find a valve that will work. No luck so far.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.