I am restoring a U-2 power unit which has a C-113 engine, similar to the Farmall A. I need parts for the carburetor and fuel lines. It has a Zenith 9750 carb (I think the IH number is 54214DB) This is different than the carbs on the A which seem to be 9749 or 9752, etc. I need a float and found that several places, but no luck on a kit, etc. None of the kits list the 9750 carb for some reason. Wonder where I can get a kit that will work, or will the kit for the 9749 or 9752 work?? Also there is an brass angle fuel shut off valve under the gas tank. It leaks. It will not shut off completely and also leaks out of the stem packing. I need something to go there to replace it. I want to leave the original metal tubing and not go to rubber hose which I could do. I need a brass angle valve with 3/8 pipe threads to screw into the tank and with connection for the 1/4 inch metal tubing. Wonder where I can find a valve that will work. No luck so far.
- Thread starter Haas
- Start date
Janicholson
Well-known Member
The leaky valve can be repaired (with skillful use of a drill to refinish the seat (by hand not drill motor) after the guts are taken out. And the brass valve taper is remade to smooth.
The kits probably work, take the time to look at the gaskets.
OEM and others (maybe this site) sell sediment bowl assemblies. Jim
The kits probably work, take the time to look at the gaskets.
OEM and others (maybe this site) sell sediment bowl assemblies. Jim
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy