binder300U said: the plug that fits on the 1 and 2 terminals on the alt fits quite loosely, is old and seems pretty worn out. possible engine vibration causes open circuit there?[/quote:eded148741]
A momentary open circuit in a loose-fitting plug could definitely cause problems! I'd get a new plug in there before you do anything else.
binder300U said: also, there does not appear to be a tab visible on the back of the alt to short out the regulator. is it under the back of the case? [/quote:eded148741]
[quote:eded148741="binder300U"] do you think a faulty ammeter can cause an open circuit?
Very unlikely. The current path inside the ammeter is a solid copper strap. Unless the terminals somehow are loose it's almost impossible for even a faulty ammeter to go open circuit.
[quote:eded148741="binder300U"]what do you think about installing an inline fusible link/circuit breaker?
I agree with the guy at the shop. A fusible link won't really protect anything. And should the link itself fail it could fry ANOTHER alternator on you. Better to wire it up solid.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.