Posted by tractorsam on February 09, 2010 at 16:59:51 from (99.192.70.12):
In Reply to: Farmall C engine posted by Cory S. on February 09, 2010 at 15:09:26:
For the C-113/C-123 blocks there are two sizes of bores (in the block) for the sleeves. Most (including your C) have a 3 5/16 diameter where the o-rings seal. The 354898 block (R1 throught R4) has a 3 7/16 diameter bore where the o-rings seal.
Your options at this point are either to return the kit and get the correct one with the smaller outside (and inside) diameter sleeves. Have your current block bored out by a machine shop to accept your larger sleeves. Or to search for the 354898 block. If you choose to search for the newer block beware, unless I'm very much mistaken the 100/200, 130/230, 140/240 all use blocks with a 3 5/16" lower opening diameter. So you would be looking for a block from a '53 or '54 Super A or Super C.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.