Posted by Mazemeister on January 19, 2010 at 16:45:48 from (24.188.81.230):
In Reply to: 986 t/c slipping posted by craibies on January 18, 2010 at 04:35:00:
sounds like the sprag in the TA is worn out. sounds just like our 806 acted before we replaced the TA.
I replaced the TA in our 986 a few years back. it's a much bigger job than the clutch. you have to do 2 splits, then take everything out of the center section (speed transmission). the TA is the last thing out. You don't have to remove the cab, but you do have to support the 2 front corners when you unbolt the cab supports from the center section.
what i'd do is this: split the tractor, put the center section in your pickup and take it to a dealer with a good shop. they can have a new TA in and everything back together in a day. you really need a forklift, trans. hoist, etc. for splitting the center section from the rear frame for this job.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
