Posted by Weldon K on November 22, 2009 at 17:57:30 from (98.16.33.221):
In Reply to: Front Loader For 706 posted by Jchamplin on November 22, 2009 at 15:44:49:
2001 loaders were designed to fit many tractors. The loader had to be ordered with the correct subframe and front mounts for the tractor it was to be mounted on . You are correct in that a loader from a 504 has a shorter subframe than one for a 706. Also the attaching method to the rear axle is different. It could easily be made to fit by cutting off the 504 style attachments and then extending the subframe by welding the needed length of 4x4 inch square tubing to the subframe and building the rear attachments like designed to fit the 706 hex shaped axle housing. The front mounts for a 706 are somewhat different from those used on a Farmall 504 and very different from those on a International 504 (the utility model ). I have a 2001 on a I-504 and a 2000 loader on a 756. I have sent info and photos to several guys who needed to modify loaders to fit other tractors. Can do the same for you. Reply if interested.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
