Posted by MeanGene1 on September 03, 2009 at 19:18:14 from (204.14.185.168):
In Reply to: Combine internals? posted by ryanwheelock on September 03, 2009 at 06:20:42:
We had a 91 and a 93, both Bean Specials- my grandfather was an IH dealer at the time. The beaners came with the spike tooth and a huge sprocket to run the cylinder slow, rasp bars were an option on the grain rigs- we converted the 93 to a rasp bar, and left the 91 set up for beans most years, unless we had enough calls for custom work that we needed both for grain- the planetary steering came in real handy when you had a windrow that hung a little long coming off the Innes and curled onto the headlands. The beaners also had perforated sections on the elevator & auger housings to let the dirt sift out, with removable covers for grain- the beaners left a serious dust cloud behind them. I spent many an evening pulling those long rods out of the windrow pickup to change the broken spring tines- you wanted to pick up the windrow in the dead center of the pickup so it didn't have to touch the big auger vanes, went right up the head intake, so you always had to pull the rod out at least halfway- and you had to unbolt every one of the double tines to slide the rod out. And then I had to fix the broken tines on the Innes... Still got a couple scars on my fingers that haven't faded
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
