Coolant in oil can happen at the head gasket. I will state that the leak can be defined pretty well if it is in the O rings at the sleeve spigot (bottom) there is a higher probability of that. The finding of the problem is as important as the fix. Otherwise you are throwing fixes at an unknown. Pull the oil pan and with 2 to 3 psi max if it is a non pressure cap, and up to a max of 7 if it has a very normal looking rad cap,(The non pressure looks like a gas cap) look up under the engine while pressurized. the leak will either come from around a cylinder base (spigot) or down the oil return areas by the cam. If none is coming out of the sleeve spigots, the head gasket on tall sleeves may be the issue. If the sleeves, it needs to be torn down completely. A tool may be able to be used (like a ridge reamer) to remove the flange to the correct height W/O removing the engine for surfacing. JimN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.