Yes you can add a finish mower on a cub. I favor the IH 59 inch over the woods. I find that the woods mowers tend to turn a little harder than the IH, but that is only my personal findings. You go with what you want, but I will tell you that I used to mow over 25 acres of yard (for different people, about 8 yards) and had no problems with a cub-loboy and an IH 59 inch. Run you about a 6-8 inch dia pulley and you should have enough power. If you are really lagging for power, then go to a 4 inch pulley. I had 2 different pulleys, one for heavy stuff and one for yards. Had to change the belt when changing pulleys, but it didn't take long to change and made a BIG difference in power. When you decrease pulley size though, you also decrease blade tip speed and sacrafice quality and smoothness of cut. I usually used the small pulley to knock down high stuff and then go over it again with the big pulley and make it look like a golf course. Also keep in mind that the sharper you keep your mower blades, the better that 59 inch will cut and the less power it will take to run it. Good luck with your cub and have fun with it. They are fabulous little tractors and it will amaze you with what it can do. Kippster
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
