Thanks Charles, I've been looking for one of those. My dealer and the case website doesn't even show the parts for the dual filters anymore. They don't even stock the thicker single filter and said they haven't sold any in years and years. They didn't carry any adaptor either.
CaseIH calls for the single 388084R93 filter for the 12 gpm pump. Wix number is 51469. The filter thickness is 2.473 inches and rated at 25 microns.
CaseIH calls for the single 388085R92 filter for the 17 gpm pump. Wix number is 51470. The filter thickness is 3.597 inches and rated at 35 microns.
The thicker one is about 1.124 inches thicker and I assume that is about how thick your spacer is.
Wix makes filters with a metal outside surface instead of the paper surface of the case filter for what that is worth to anyone. Less chance to tear up and end up in the pump. At O'reillys they are a little cheaper also but may need a day to ship if not in stock.
My question is about putting some type of gasket cement on one side so it stays stuck and then you only need to change one gasket with the filter? And then which side would be best to stick the adaptor on, the tractor or the cover plate? Guess I'd go to the tractor side.
(technically, I've never replaced the gasket but just bolt the plate back up and it doesn't leak. The gasket is stuck to the plate. The spring of the bypass pushes the plate away.)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
