ken, you don't have enough to hook up the loader. You'll need to buy some parts.
The loader has two functions, and that requires two remote valves. I'm going to describe what you need assuming a stock H with belly pump, because your description of what you have is kind of vague.
Simplest thing to do is get a dual remote hydraulic valve, which has two valves built into one unit. It must be an open center type valve. Also give preference to valves with NPT (standard pipe threaded) holes, so you can make the hookups with as few adapters and fittings as possible.
Mount the valve in a convenient location near you on the platform so you can operate the valves.
You'll need to run a hose from either the front hydraulic port on the left side, or the single port on the right side to the IN port on the valve. Run a second hose from the OUT back to the hydraulic fill pipe under the gas tank. You can Tee it in so as to allow for adding oil, but you must now use a solid cap instead of the regular ventilated cap. Place both the cap and dipstick somewhere safe so you can put it back if you take the loader off. A regular 3/4" pipe cap from the hardware store is fine.
Now you can hook the two bucket cylinders to one of the valves, and the two lift cylinders to the other valve.
You must lock the control rod for the belly pump back to make it work, and your foot must be off the clutch pedal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
