Posted by chuckles on December 12, 2008 at 08:07:13 from (71.253.82.62):
I have a 340 with a Thompson 12 gpm transmission driven hydraulic pump. It had a leak around the mounting plate that I decided to fix. When I pulled the plate and the pump, I noticed that on of the teeth on the pump gear was chipped. I'm not sure whether I did it when I pulled the pump or it was that way. Regardless the 16 tooth gear part number 370949R1 is no longer available. They do still have a 15 tooth gear part number 373711R1, but I am not sure if that will work. Does anyone know? If not does anyone know where I can find a used one? or is it possible to have the tooth welded and re machined (about 1/2 of the tooth is missing)?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
