Yes, this pump enough flow to operate both a loader and power steering. You will have to use a priority flow divider though. The flow divider diverts enough flow to the power steering FIRST (the flow is adjustable) then whatever flow is left is sent to operate the loader, rear remotes, or whatever else you want it to do. Another thought, this pump is driven off of the cam gear and the load of the pump puts more stress on that gear and can cause the cam gear to break. You may want to consider replacing the cam gear with the heavier-duty cam gear off a Super M, 400 or 450. Some people have not used the heavier cam gear with the engine driven hydraulic pump and have claimed to have had no problems, while others were not so lucky. I guess the choice is yours, one the one hand it is not quick and easy to change the cam gear, but if you do not change it and the gear breaks, then you will be forced to change it along with anything else that broke when the cam gear did.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
