Re: 560 hydrualic problems

Posted by Ted in NE on November 08, 2008 at 09:39:07 from (74.85.105.88):

In Reply to: 560 hydrualic problems posted by farmallguy3 on November 07, 2008 at 17:11:30:

When you removed the fast hitch you need to remove the rod that runs along the left side of the trans. cover. Lock the linkage that the rod was hooked to so it can't move. With the engine running move the lever that you used to run the fast hitch carefully one direction or the other untill the hyds come off high pressure. Then tie the lever so it can't be moved. This will center the teledepth valve spool. It is possible that the gears in the valve have broken teeth. Will have to be repaired. Look at the end cap on the valve that runs the fast hitch{back cap}. Could have a cap screw in it. This was used to center the spool if it ever had a single row beet harvester on it. Had to remove the fast hitch to mount the harvester

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]