560 hydrualic problems

farmallguy3 · Nov 7, 2008

I have a 560 gas that has hydraulic problems. when we got it the fast hitch would not stay at one place. we thought the cylinder was bad so took the fast hitch off, also took off to loose weight to pull with. the hydraulics have a humming type noise. it has fluid and the filter was changed within the last 15 hours of working. right now i dont have the hydraulics working but would like to use any ideas or suggestion are appreciated

Ted in NE · Nov 8, 2008

When you removed the fast hitch you need to remove the rod that runs along the left side of the trans. cover. Lock the linkage that the rod was hooked to so it can't move. With the engine running move the lever that you used to run the fast hitch carefully one direction or the other untill the hyds come off high pressure. Then tie the lever so it can't be moved. This will center the teledepth valve spool. It is possible that the gears in the valve have broken teeth. Will have to be repaired. Look at the end cap on the valve that runs the fast hitch{back cap}. Could have a cap screw in it. This was used to center the spool if it ever had a single row beet harvester on it. Had to remove the fast hitch to mount the harvester

560 hydrualic problems

farmallguy3

Member

Ted in NE

Member

Similar threads