...but it flexed too much, so I cut and redrilled the channel iron and tried it like this with a 6x6, and it was super-stable...
...and the pulley slid right on.
I did exactly like Hal said, and had the cover loose and the seal coated.
Ron's method sure sounds easier, and my crank was also threaded, but I've heard from others where their's weren't. I had to clean a lot of mud and chaff out to even realize mine was threaded.
I heated my pulley to 200 degrees in our oven, (when the redhead wasn't home), and the bottle jack got it on right quick and easy before it could cool off and start to 'grab', but I've also heard that some bottle jacks won't work when they're on their side, and I've also heard that they will if the 'pump' part of the jack is toward the floor, but I can't promise anything either way. Mine worked, and I don't remember if I had the 'pump' at the bottom or not. Big help, huh?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
