Posted by Owen Aaland on August 14, 2008 at 22:14:04 from (65.161.86.52):
In Reply to: IH 1586 PTO posted by Evhoward on August 14, 2008 at 18:48:32:
Evhoward said: (quoted from post at 18:48:32 08/14/08) I am trying to fix a broken 1000 RPM pto shaft on a IH 1586. The CaseIH parts web site show that the 1586 only had a single speed PTO (1000 RPM), I clearly have a dual speed both 1000 and 540 RPM. The pictures for a Hydro 100 and Hydro 186 clearly match the PTO on my tractor. Would it have been possible for the PTO systems to be interchanged?
When I worked at a dealership when these tractors were sold new, if you wanted a dual speed PTO, they would be ordered from the factory without a PTO. They would also order a PTO kit for a 1086 which we would then install before the tractor was delivered. The 1586 uses a larger internal PTO drive shaft than the smaller tractors so the shaft in the rear housing had to have two different size couplers on it to fit the dual speed PTO. Everything else is the same as the 1086.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
