Re: Help Help with TA clutch

Posted by Owen Aaland on July 23, 2008 at 11:03:06 from (65.174.247.11):

In Reply to: Help Help with TA clutch posted by JF Klein Rot on July 23, 2008 at 08:24:24:

With the TA lever back, does the tractor free wheel when slowing down? If so then you do not have hydraulic control to either clutch pack.

If you had the input shaft out of the clutch carriers, did the oil holes get lined up when the shaft was reassembled? Are the sealing rings in place on the input shaft? Did the jumper tubes get reinstalled?

Using a gasket as a pattern, I made a plate to bolt on the clutch housing with holes to be able to pressurize the jumper tubes to verify that the clutches are working. You can just apply air pressure to the high and low jumper tubes but be careful because the air pressure will blow them out. The plate just holds them in place for hands free operation.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]