Posted by ZANE on January 10, 2008 at 11:35:15 from (205.188.116.73):
I have a 1965 maybe IH backhoe loader tractor. It has the six cylinder engine with shuttle transmission and four speed.
I have a leak at the swing trunion. There is a big seal at the top of the pinion shaft and an O ring at the bottom of the pinion shaft. I recently replaced the seal and the bottom tapered bushings but still have a leak. I think maybe the bushings are worn and letting the O ring come away from the shaft. I can't see how to remove the big pinion shaft from the swing trunion housing so I can repair the bushing/s and the seals. It appears that the big steel busing that contains the upper bronze bushing and the seal on top must be pressed out of the trunion housing before the pinion can be removed.
Anybody know for sure how to fix this or where I might find a repair manual or parts breakdown for reference???
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.