Posted by Harold H on December 29, 2007 at 12:04:37 from (75.90.3.59):
In Reply to: bristish mta posted by Pat-CT on December 28, 2007 at 11:16:22:
Hugh,
The rear end casting on the Farmall B-450 was basicly the same as the casting of a M or SM. However the top was completely different. The rock shaft and lift arms were built in simular to the Farmall 656 rather than seperate add on as the 450 or 560 used.
Richard,
The Farmall B-450 was imported to the Memphis District which served the Mississippi and Arkansas Delta areas because most of the tractors in this area were operated by tractor drivers rather than owner operators and received hard use , often with little continuing or preventive maintenance. At the time IH changed from the Farmall 450's to the six cylinder 560's with more complicated systems, many farm owners wanted a simple new tractor in the same horsepower range, thus IH offered the Farmall version of the B-450 to the South and Texas only. They performed excellently but they were soon made obsolute by size on the large farming operations, ie 806, etc.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.