I have hauled all my winters wood in a 94 Dakota and one trip I could get over a rick and a half(rick 4x8) in one load and it would have the frame sitting on the rear axle. I was hauling mostly wet cherry. It would fill the 8ft bed to about half way up the rear window to the very back of the bed. Tires didn"t like it and I am sure it stressed the frame also. I had to go 40 miles with it and I went about 30 MPH on smooth roads. I don"t think a Ranger can haul as much as the Dakota so just keep watching the axle to frame bumpers as you load it and keep the heavy stuff as far forward as possible with the lighter stuff in back. I would give it at least two inches of clearance if you like the truck or if you don"t like the truck, go ahead and set the frame on the axle but go very slow and be sure your tires are aired up to max rating and I would stick to the backroads unless they are super rough. I just got a 71 Chevy Custom Camper 3/4T which has extra heavy duty suspension to do my hauling with from now on. Dad has one just like it but a "longhorn" he bought new in 69 and we used to load it as high as the top of the cab all the way back with side boards and we hauled mostly oak elm and hickory. I am going to go cut and split a load tomorrow for the first time with this truck so I will see how it does! I have a feeling I will get wore out before I get it filled!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
