Posted by Janicholson on September 10, 2007 at 06:26:11 from (199.17.6.122):
In Reply to: How screwed am I? posted by Mike CA on September 09, 2007 at 19:34:01:
You are not screwed. Three elements of the situation. Though not terriblly Full of flakes, cleaning it was a good idea (though mine) In hind sight, the best attachment a bolt has with the outside world is when it has its head on it. So, heating, working tighter and looser one degree of motion, spraying, and shocking with tiny hammer blows is best done before turning the head off (I know this is a painful lesson, but it is normal) This unfortunately will not be the last broken bolt. Twisted off bolts come in two flavors. Twisted off from overtightening into nice threads and having the head pull off, or having the head shear off from side force put on the shank (both of these leave the bolt loose in thethreads) Or (worst) the threads are corroded and stuck, or crossed and jambed, or forced into the bottom of a blind hole from being too long for the female threads. The most easily removed are the first kind, Patience and time are needed for the second. Best of luck, JimN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.