Farmall & IHC Tractors Discussion Board |
IH 424 Gas Misting out of Gas Cap
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Chris Hibbert on July 22, 2007 at 10:57:45 from (24.106.231.115):
On my '67 424 Gasoline, when I drive around on varying terrain, gasoline blows out past the seal on the gas cap. The gasoline isn't coming out of the vent holes (2) but at the mating surface where the cap screws tight onto the tank. First guess would obviously be that the gasket on the gas cap is worn or missing but this is a brand new cap directly from IH. The reason I got this cap is that the previous one did the same thing (it looked old but also had the two vent holes in it). Is it possible that the mating surface on the tank itself is worn thin enough that the new gasket doesn't seal properly? When I put the cap on, it's pretty tight when you turn it all the way. Should I take the gasket from the other cap and double them up? Or. . . . does this point to a problem elsewhere? Thanks in advance for your help! Chris Hibbert
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|