Re: Loader changeover to hyd.bucket and down pressure

Posted by Janicholson on July 18, 2007 at 15:22:37 from (66.173.50.7):

In Reply to: Re: Loader changeover to hyd.bucket and down pressure posted by r bond on July 18, 2007 at 14:24:51:

I have no personal info on that model, and it probably is not in the archives. There are diagrams of two way cylinder systems. I would be giving you incorrect info if I attempted to tell you about that tractor's hydro system. I will say you need a pressure line (sense it has a loader on it I assume it has a valve controlling it) Probably a one way spool with open center. I would look to replace this valve with a two two way valves to get this job done. If it is a built in valve, it may be a valve with a control to use it as a two way, but that still leaves a second valve needed. A service manual from IH, or an IT manual from this site will help. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]