Farmall & IHC Tractors Discussion Board |
Solid State 6v Regulator?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JayWalt on September 01, 2006 at 17:28:33 from (24.223.138.48):
As some of you probably know, the old style generators/regulators function as follows... When there is a load on the battery, the regulator turns on the field winding of the generator, which in turn puts out power, when there is no load, the regulator stops supplying powerto the generator, and hence stops puting out power. This is dont by current sensitive relays in the regulator box. This is not a truly regulated system, by any means. Replacement regulators run upwards of $50 easy. Are these the old relay style or have they switched to a newer solid state regulator. The solid state ones actually vary the field current which varies the output voltage of the generator. Now I have no intentions on replacing my regulator for the time being, but I just wondered if such a regulator exists (for 6 volt sytems).. This would elimate the possibilty of overcharging the battery in the event of a continual non battery charging load. Now if one converts to 12v, the alternator is self regulated and totally solves this issue.
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|