Farmall & IHC Tractors Discussion Board |
Brake shaft bearings on H
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Rock2000 on July 24, 2006 at 18:44:20 from (65.75.33.247):
Our 1950 H is making a noise (tough to describe, kind of like a shuddering from the axle area) on the left side, presumably from either the bearings on the brake shaft, or the bearings on the axle itself. It's tough to pinpoint, but I'm leaning towards the brake bearings. Is there an easy way to determine this? The noise occurs most easily when the tractor is rolling, as opposed to driving under power. I thought it would be easy to remove the brake bearing carrier and check them, but something isn't right. I removed the drum and carrier bolts, and used the bolts to pull the carrier out a ways. But then I was getting some large resistance and figured it was more complicated then this. The manual I have doesn't go into any detail on this. I thought this was the procedure, but now I see a section that seems to say I basically need to take everything apart (rear axle, drive gear). That can't be right either. Is this going to be more difficult then I thought? Thanks
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|