Farmall & IHC Tractors Discussion Board |
Re: replacing a tricycle B front end with wide fro
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Charles McNelly III on May 13, 2006 at 21:26:02 from (65.54.154.111):
In Reply to: replacing a tricycle B front end with wide front e posted by greensboro george on May 12, 2006 at 13:04:42:
Hi George, I"m in the process of rebuilding my 47 B. I put a wide frontend on it. I took the steering box with the steering arm support and mounted it up to the tractor. I went to a local pipe supply and found a pipe that was longer then the factory pipe. Had a machine shop make the cross pipe with brass bushings and I took some black pipe and made new steering arms. Overall it looks like the factory made it. I did have to notch the grill a little due to it hitting the steering box. It does not turn as sharp unless you hit the brakes a little. E-mail me,I will send some pics as soon as I have the rear end back together if you like. Charles
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|