Farmall & IHC Tractors Discussion Board |
Cub questions
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Nicolas on April 25, 2006 at 04:35:18 from (72.155.172.163):
I recently bought a Cub and have a few questions. The serial is: 37638, can anyone tell me what year it is? It hasn't been run in at least 10 years, maybe a good many more. After a thorough check of all the fluids and such, and a couple hours of tinkerin' today, it fired up and ran pretty good. The pistons were slightly stuck, and after it was freed up and spinning with the starter, a compression check showed numbers of approx. 15, 30, 40, 85. I feel like the rings are probably sticking in the grooves. It ran decent, didn't even take the carb apart. Let it run for a few minutes, then discovered the raditor is stopped up so had to stop it. Next question, any suggestions how to get out the bolts holding the radiator to the lower casting that are rounded off? I also need a tie rod end, one is broke on the front. Any thoughts on that? Thanks for any information, Nick
Replies:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|