Farmall & IHC Tractors Discussion Board |
Re: M starts fine then dies. HELP!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Brownie 45 on February 06, 2006 at 04:47:24 from (207.177.82.209):
In Reply to: M starts fine then dies. HELP! posted by Granger on February 05, 2006 at 20:18:26:
Another thought occured to me. I don't know where the wiring loom is located on the M, but on our SMTA, it runs across the top of the valve cover and is held by 2 clips under the 2 valve cover bolts. Some time ago, the SMTA was behaving as yours is. Turned out to be the wire feeding the ignition coil was separated inside the wire insulation [inside the loom].This was where the loom was held down at the front valve cover bolt. Whether from heat, flexing, vibration, or whatever,it came apart. It required cutting into the loom & splicing the wire. Never have had any more trouble. When you think you've seen it all, you get a reality check once in a while. Worth checking.
Replies:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|