Farmall & IHC Tractors Discussion Board |
Re: Frustrated with B starting
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Nat 2 on January 16, 2006 at 05:02:51 from (64.80.108.52):
In Reply to: Frustrated with B starting posted by Carpenter turned shade tr on January 15, 2006 at 14:42:46:
The stock starter system on a B is a very simple setup: 1. Fat cable from + on battery to tractor frame. 2. Fat cable from - on battery to starter button. 3. Fat cable from starter button to post on starter. That's it. You can only possibly have a problem in one of five places: 1. The cable from the + to ground. 2. The cable from the - to the starter button. 3. The starter button itself. 4. The cable from the starter button to the starter. 5. The starter. It's GOT to be in one of those five places. There's no voodoo magic involved. BTW, just because the starter locks up does not mean it needs to be rebuilt. Usually, the problem is caused by a worn Bendix drive and/or worn teeth on the ring gear.
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|