Farmall & IHC Tractors Discussion Board |
Re: 450 leaking hyd somewhere
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by El Toro on November 28, 2005 at 05:46:33 from (152.163.101.13):
In Reply to: 450 leaking hyd somewhere posted by Mylesa on November 25, 2005 at 16:42:05:
There's probably a groove worn on the shaft of the drive gear in your hydraulic pump. The seal gets brittle from age. It could have an oring. Case/IH has kits to repair these pumps. If you don't feel comfortable doing the rebuild. Case/IH can probably rebuild it. You never want to run a hydraulic pump without oil. It will ruin the pump since the hydraulic oil lubricates the internal parts of pump as well. Just about the same as an engine without oil. Speedi-sleeves are available to cover the groove worn into the shaft. One more thing when doing it yourself you need to have the work bench clean as a pin & all pump parts cleaned with a good cleaner. Hal
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|