Farmall & IHC Tractors Discussion Board |
Re: Groan!!!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on November 01, 2005 at 06:34:46 from (4.124.82.138):
In Reply to: Re: Groan!!! posted by Allan in NE on November 01, 2005 at 05:58:38:
Well yea ya could and if i was going to go thru all the trouble it would have to be the 310 not the 282 . But why worry about that just run the 301 till it dies , you ain't going to be worken it that hard as a loader tractor and other chore work . And if you are going to be grinding feed i sure as heck would be using the 966 for that . We have had enough problems with the 706 on the grinder , most of the time we use my 806 or the 1066 or even the S/MTA , i can not explain it but but the 706 does not like to grind feed it will either eat a exhust valve or eat a piston . So we just use the other ones and every one in a bluemoon even the old 720 Deere just to clean the carbon out of her when ya put the small screen in that will make her talk .
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|