Farmall & IHC Tractors Discussion Board |
Re: Hydraulics on 340
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wayne Johnson on October 04, 2005 at 15:34:23 from (204.249.66.195):
In Reply to: Re: Hydraulics on 340 posted by K.B.-826 on October 03, 2005 at 15:54:45:
The screen is gone from the orifice. The top hole with the piston out, I can push the valve in the back with my figure and move. The bottom hole with the piston and spring out I can not move the valve in the back. The local IH dealer told me not to worry about the screen. What I did is what they would do and didn't know why it didn't work. I really don't know what to do next. It definitely is not working. It is under pressure all the time unless you are moving the lift. The book I have shows are the parts are correct and assembled correctly. I wounder about the lower valve only because it is called a valve in the book I have and a valve to me should move. I am stumped. Thanks for all your help, I really do appreciate it, Wayne
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|