Farmall & IHC Tractors Discussion Board |
IH irrigation pump motor...information?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by redcub on July 29, 2005 at 21:38:57 from (64.12.117.13):
I have been looking around at the local Farmall junk yard and came across a Whitewesting irrigation pump that has an IH motor as the power plant. The Whitewesting plate on the pump says 1971 model. The motor is a 4 cylinder with a big IH stamped in the block at the front lower left (facing the radiator) and the casting number on the block is 534465R1 (the last digit could be an "I"). The distributer comes out on the left side of the block about midway and angles out and up. The missing carb would be on the right side (facing the radiator). It looks to be relatively the outside demensions of an M Farmall motor. Can you tell the cubic inches of the motor from this casting number...HP? Could this bolt up to an M? What else is needed to get information about this mystery?
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|