Farmall & IHC Tractors Discussion Board |
My 154 Cub-Loboy won't run at 800 RPM??
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John in Ct on June 12, 2005 at 18:30:50 from (69.24.45.11):
My 154 Cub-Loboy won't run at 800- to about 1,100 RPM. It idles great at around 500-525 RPM ( I know the book says 475 RPM) and the the max idle speed is around 2,200 RPM. (I know the max is about 2400+-). My RPM gauge could be a little off too. It starts with no choke and has plenty of power. It runs great with the exception if I set the throttle into the 800- 1,100 RPM range, it goes BLAAAAAAA and will stall right out (even if it has been running an hour. I have to choke it to re-start it. I can go from high idle to low idle with no problems. Any ideas? I put an IH carb kit in it last year and set the float hight and drop to spec. I also have a Fram G3606 inline filter that I just replaced. I have used this type of filter on this tractor for years. Thanks!!
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|