Farmall & IHC Tractors Discussion Board |
Re: Fer Allen.. Mah 966 an 300u Thigh maker
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John A. on March 04, 2005 at 20:25:13 from (65.161.172.108):
In Reply to: Re: Fer Allen.. Mah 966 an 300u Thigh maker posted by Sloroll on March 04, 2005 at 06:37:01:
Sloroll, Call Gensco @ Houston Texas. Their # is 800-633-5287. You can get used, or new ( which is a new recap on a older carcas. Don't get the wheels they sell. The offset of the center part of the wheel is 1/2 in to deep. When mounted on the tractor,jacked up, the clearence is less than 1/4 inch. After you set the tractor back down the tire just rubs a touch. Then put a load in the bucket and it realy rubs hard. Just get the tire and use your rims. The last question you have to answer is wheather to tube the tire! or Get that sealer they sell and run the tire tubeless. A good tire shop with a machine can turn the tires onto your rims. I have been very happy with mine, hope you are too. Later, John A.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|