Farmall & IHC Tractors Discussion Board |
The pump is not the problem.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve from MO - dangit! on February 22, 2005 at 07:48:43 from (168.166.54.11):
In Reply to: Best PS Pump for farmall A CHEVY?? posted by farmallkid From Ont, on February 22, 2005 at 06:02:35:
You could address this in several ways. What kind of oil are you using? Hydraulic fluid, like Hy-Tran or John Deere 303 or their generic equivalents would thin out less when warm. If you are using detergent motor oil, you have a system full of foam. Foam won't lift or cool anything. How fast are you running this pump? It normally ran at 800-2500 rpm in a vehicle. Some were good up to 5-6000 rpm. If this one is run from the A's belt pulley it is probably around 2500 rpm already. Could you put an oil cooler in line? They were available for vehicle automatic transmissions. How big is your reservoir? A bigger reservoir provides more oil.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|