Farmall & IHC Tractors Discussion Board |
Re: Belly Blade For a Farmall M
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ibby on January 08, 2005 at 05:33:23 from (63.146.104.137):
In Reply to: Belly Blade For a Farmall M posted by JD790 on January 07, 2005 at 22:00:32:
I've often thought a belly blade would be perfect for dirt leveling, or very light snow plowing, but your front tires would have to go over any banks you're trying to push the snow up into. I think you would need quite a narrow (vertically) blade to get a decent lift to avoid dragging stuff back. That being said, If you've got the tools, time and materials, I'd say go for it, and let us know how it works out! On a related note, I built a snow plow for my Oliver 66 that braced back to the rear axles on pivots, and used the cultivator lift to pick it up. I set the rear box tubing extensions as far out on the axles I could, and X braced them under the belly to prevent it from tracking sideways on angled operation. It worked great and I used it for years. I'd think you could do the same with your M.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|