Farmall Tractors Discussion Board |
Re: Super A brake job
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Daniel on November 18, 1999 at 10:24:55 from (206.74.50.21):
In Reply to: Super A brake job posted by steve on November 18, 1999 at 08:39:17:
Nothing will fall out except maybe the pins the brake bands pivot on. Check the axel shafts for grooves where the seals ride and have them sleeved if they are any. Otherwise new seals will not hold. (Don't ask how I know this). Take the wheel off first and then the drop housing. Too heavy all at once. Also change the seal in the right side of the transmission; you will have to take the tube from the tranny to the right drop housing. Check all bearings. It is not a hard job, but not alot of fun either. Help is a must.
Follow Ups:
Post a Followup
|